JVC Everio GS-TD1 - Adjusting Parallax During Playback

During Still Image Playback
.
Display Description
1
3D/2D Mode Displays the current playback mode of 3D or
2D. “3D” is displayed during 3D playback, while
“2D” is displayed during 2D playback.
2
T
Continuous playback of grouped files (such as
still images captured by continuous shooting).
3
k
Enables manual parallax adjustment
4
h
Returns to the previous still image
5
Recording/
Playback Mode
q
Switches between recording and playback
modes.
6
u
Returns to index screen
7
A
Displays the index screen (thumbnail display)
to perform deletion
8
x
Switches between 3D and 2D modes.
9
MENU Displays the menu screen
0
g
Advances to the next still image
a
d
Starts/pauses slideshow
“Slideshow Playback” (A p. 57)
Memo :
0
Tap or drag on the operation area of the touch screen.
0
Operations buttons on the touch screen disappear if the unit is not
operated for about 5 seconds. Tap on the screen to display the operation
buttons again.
0
Operation buttons on the touch screen are displayed as long as there is
contact with the effective operation area.
Checking the Recording Date and Other Information
A Press the INFO button.
You can display the recording date of the selected file.
.
Adjusting Parallax During Playback
When playing back 3D images of scenes where there are multiple objects
arrayed in a line from near to far, or objects that are extremely close to the
camera, you can change the way they appear to the eye.
0
Parallax can only be adjusted when 3D images are displayed on the unit’s
LCD monitor.
1
Tap k.
.
2
Tap “MANUAL”.
.
0
The parallax adjustment screen appears.
0
To set parallax adjustment to auto (default), tap “AUTO”.
3
Adjust the parallax.
.
0
To increase the amount of correction, tap “+”. Doing so increases the
value of the parallax display.
0
To reduce the amount of correction, tap “-”. Doing so decreases the
value of the parallax display.
4
Tap “SET” to confirm.
.
Caution :
0
Too much parallax may cause the 3D effect to be lost.
0
If you see double images even after parallax adjustment, set the display
on the TV to 2D immediately. In addition, set the LCD monitor to 2D display
accordingly.
Memo :
0
While this unit is equipped with the function to adjust parallax
automatically, it may not work properly for the following subjects.
- Subjects beyond the recommended shooting distance (especially
subjects that are extremely close to the camera)
- Numerous subjects of the similar shape arrayed in a line, such as the
windows of a building
- Straight subjects such as electric wires
In these cases, adjust the parallax manually.
Playback
56