Indications During Time-Lapse Recording
.
Display Description
1
Speed Indicator Displays the recording interval that is set.
2
Video Quality Displays the icon of the video quality that is set.
3
Recorded Time Displays the actual recorded time of the video.
Recorded time increases in units of frames.
4
Actual Elapsed
Time
Displays the actual elapsed time after
recording starts.
5
Remaining
Recording Time
Remaining time left to record with the currently
selected video quality.
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
Setting Details
OFF Deactivates the function.
1SEC INTERVAL Takes a frame at 1-second intervals.
Recorded videos will be played back at 30 times
speed.
10SEC INTERVAL Takes a frame at 10-second intervals.
Recorded videos will be played back at 300 times
speed.
80SEC INTERVAL Takes a frame at 80-second intervals.
Recorded videos will be played back at 2 400 times
speed.
Caution :
0
Audio cannot be recorded during time-lapse recording.
0
Zooming, simultaneous still image recording, and image stabilizer are not
available in time-lapse recording.
0
When recording is stopped with the recorded time less than “0:00:00:17”
, the video will not be saved.
Memo :
0
Settings of time-lapse recording are reset when the power is turned off.
To start time-lapse recording again, it is necessary to make the selection
once more.
0
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse recordings with long
intervals.
It is also recommended to fix the focus and white balance manually.
“Tripod Mounting” (A p. 22)
“Adjusting Focus Manually” (A p. 37)
“Setting White Balance” (A p. 40)
Recording
47
To Next Page
Loading...
Need help?
General