JVC KW-V340BTM - Bluetooth Mobile Phone

Bluetooth®Bluetooth®
• The status is shown as follows:
– <Connecting>: Connection is in progress.
– <Connected>: A connection has been established.
– <Connect Ready>: A connection can be
established.
– <Disconnecting>: Disconnection is in progress.
– <Disconnected>: No connection is established.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
To delete the registered device: Perform step 1,
select the device you want to delete in step 2, then
touch [Remove].
• A confirmation message appears. Touch [Yes].
Bluetooth mobile phone
When a call comes in...
Touching the operation keys performs the following
actions:
[ ]
Answers a call.
[
]
Rejects a call.
• Call information is displayed if acquired.
• Phone operation is not available while the picture
from the rear view camera is displayed.
• For KW-V340BT Region 3, KW-V340BTM Region
2, KW-V440BT Region 3 (except for Indonesian
models), KW-V440BTM Region 2: When receiving
a call during navigation guidance, the screen is
switched automatically.
– To return to the navigation screen, touch [
].
During a call...
Touching the operation keys performs the following
actions:
[ ]
Ends a call.
[
] /
[ ]
Switches between handsfree mode and
phone mode.
[DTMF] Enters DTMF (Dual Tone Multi
Frequency), then sends text using the
keypad.
NR LEVEL
[–] / [+]
Adjusts the noise reduction level.
(–5 to 5, initial 0)
EC LEVEL
[–] / [+]
Adjusts the echo volume level.
(–5 to 5, initial 0)
MIC LEVEL
[–] / [+]
Adjusts the volume level of the
microphone. (–10 to 10, initial –4)
• Press + / – buttons on the monitor panel to adjust
the volume of the call or earpiece.
Making a call
1 Display the phone control screen.
On the Home screen, touch [Phone]. (See also
page 6.)
2 Select a method to make a call.
1 From the call history* (missed calls/received
calls/dialed calls)
2 From the phone book*
3 From the preset list (Page29)
4 Use direct number entry
5 Use voice dialling
* Applicable only for mobile phone compatible with PBAP (Phone
Book Access Profile).
3 Select a contact (1), then make a call (2).
When item 1, 2 or 3 is selected in step 2:
28
ENGLISH
00_KW-V2018ST_M_ENG.indb 2800_KW-V2018ST_M_ENG.indb 28 17/6/2017 7:35:50 AM17/6/2017 7:35:50 AM