29
Troubleshooting
3.2.2.3 Check all the connection lines
3.2.2 Circuit
3.2.2.1 Check fuse inside line pencil
connector
If the fuse is damaged, machine can not be started on.
3.2.1.4 Press button
Operation all the function buttons on the control panel to judge if the press buttons are all right，and confirm issues and
causes according to check list 3.1.
3.2.2.2 Check driving motor fuse of
PCBA
If fuse damaged，driving motor will not work and
machine can not be started on.
To Next Page
Loading...
