Kalerm KLM1602 - Disassemble Solenoid Valve Group

41
2 3
4
1
1
1
1
1
2
1
Repair
5. Disassemble 4 screws from support
and take out drainage valve group
Note：There is a sealing element left at
the bottom after taking out drainage
valve group
4.2.9 Disassemble solenoid valve group
1. Refer to 4.2.1.1-4.2.1.4-disassemble right side section
2. Pull out 3pcs terminals on
soleniod valve
3. Disassemble 2 screws
4. Pull out the silicone pipe and spring
clip,remove the solenoid valve