MiniVision2 – User Manual
Page 12 / 71
Getting Started
The User interface basics
The MiniVision2 interface has been developed to ensure ease of use:
All items visible on the MiniVision2 screen are arranged in a list format to provide you with a
simple and linear navigation
Each information is displayed on one line
Long texts exceeding the screen width, automatically scroll horizontally
By default, the text displayed on the screen is written in white on a black background
When you use the Up and Down buttons to navigate the phone menu system, the selected
item is displayed in inverted color
Each selected item is vocalized
When opening a new screen, MiniVision2 selects the first item in the list
When you go back to a previously opened screen, MiniVision2 returns to the last selected
item
When you reach the beginning or the end of a list, a beep follows the vocalization of the
selected item
To reassure you and confirm that an action has been done, a message of confirmation or
information could be displayed on the screen via a drop-down banner (this message is also
vocalized if the "screen reader" option is enabled). To dismiss this message, simply press
on any key and continue using the phone.
Navigate through the menu system of MiniVision2
Here are the different buttons allowing you to navigate the MiniVision2 menu system:
The Up button selects the previous item in the list.
The Down button selects the next item in the list.
The OK button confirms your choice and validates the element that is selected.Validating
an item usually has the effect of displaying a new screen.
The Back button is used to return to one screen back (in the event of an error for example).
The Menu button is used to access the options of the displayed screen.
The End call button returns to the home screen. If you are already on the home screen,
this will put the phone in sleep mode.
Good to know: a long press on the Up button selects the first item in the list and a long press on
the Down button selects the last item in the list.
The description of all button functions is summarized in the section « Index – Navigation panel
keys».
Change the audio volume of MiniVision2
The Left and Right buttons open the audio volume control panel of MiniVision2. You can manage
different volumes as follows:
General volume - 15 levels: volume of vocalization and FM radio
Alarm volume - 7 levels: volume of the alarm tones
Ringtone volume - 7 levels: volume of the phone ringtones
Once the volume control panel is opened, use the Up and Down buttons to select the volume you
want to change. By default, the "General Volume" is selected. Then use the Left button to
decrease the level of the selected volume or the Right button to increase it.
The volume adjustment screen closes automatically after 5 seconds of inactivity. You can close
this screen at any time by pressing the OK button or the Back button.
Good to know: the volume of communication is independent. It is set directly during the call using
Left or Right buttons.
To Next Page
Loading...
