Kapsys MiniVision2 - Use Voice Commands

MiniVision2 – User Manual
Page 13 / 71
Good to know: The level 0 of the ringtone volume corresponds to the "Silent" mode (vibrator and
ringtone disabled). MiniVision2 has also dedicated key shortcuts to mute / unmute directly the
ringtone (for more details refer to chapter ‘Accessibility shortcuts’).
Use voice commands
MiniVision2's voice recognition allows you to launch certain actions via predefined keywords
embedded in the product.
This service requires an internet connection (Wi-Fi or 3G / 4G via your wireless provider - requires
inserted SIM card and a wireless subscription that includes a data plan). If you are not connected
to a data network or if the data rate is insufficient, the service will be inoperative and MiniVision2
will inform you with a message on the "No data connection" screen.
To use voice commands, long press the OK button from the home screen or from the list of
applications. Once the beep has sounded, clearly say one of the following keywords:
 « Call » followed by the name of the contact: allows you to call a contact from your
phonebook.
MiniVision2 then opens a new screen with the different contacts that match your search.
Use Up and Down to scroll through the list and press the OK button to confirm the contact
and start the call. For more information, please refer to the « Phone » section.
 « Send a message to » followed by the name of the contact: sends a message to a contact
in your phonebook.
MiniVision2 then opens a new screen with the different contacts that match your search.
Use Up and Down to scroll through the list and press OK to confirm the contact and move
to the message entry screen. Then enter your message on the keypad or via the voice
command and press the OK button to confirm the sending. For more information, please
refer to the « Messages » section
 « Create a note » followed by the text of the note (Not available on MiniVision2 Lite): allows
you to directly open the creation screen of a note with the dictated text inserted into the edit
box. Confirm the creation of the note by pressing the OK button. MiniVision2 then redirects
you to the Notes application. You can then use Up and Down to browse the different notes
stored in your product. For more information, please refer to the « » section.
 « New contact »: opens directly the contact creation page.
Then use Up and Down to scroll through the fields (first name, last name, phone number,
type, note and ringtone) and press the OK button to edit the fields. For more information,
please refer to the « Contacts » section.
 « New alarm »: allows to directly open the alarm creation page.
 Then use Up and Down to scroll through the fields (activation, time, ringtone and repetition)
and press the OK button to edit the fields. For more information, please refer to the « Alarm
» section.
 « New event »: allows to directly open the event creation page.
Then use Up and Down to scroll through the fields (title, date, time, recurrence, reminder
and ringtone) and press the OK button to edit the fields. For more information, please refer
to the « Calendar » section.
 « Create a voice memo »: allows to launch automatically ‘Voice recorder’ application, just
speak after the beep and press OK to stop the record. For more information, please refer to
the « Voice recorder » section.
 « Phone »: Open the Phone application.
 « Contacts »: Opens the Contacts application.
 « Messages »: Opens the Messages application.
 « Alarms »: opens the Alarms application.
 « Calendar »: Opens the Calendar application.
 « Camera »: Opens the Camera application