MiniVision2 – User Manual
Page 26 / 71
Managing Messages in Discussion mode
When you send a message for the first time, MiniVision2 automatically creates a discussion in
regrouping all the exchanges that you will have with this contact. In the same way, when a
correspondent sends you a message for the first time, a new discussion is created. When you
reply to a message from a correspondent, your message is saved in the discussion associated
with that contact. By default, the name of the discussion is the name of the contact, if the sender of
the message is part of your contacts, otherwise the discussion will be named with the phone
number. The discussions are sorted in chronological order, the most recent being at the top of the
list.
Send a new message
From the Messages application main screen, press Menu and select “New Message” using the Up
or Down buttons and confirm with the OK button. A contact selection screen appears. Two options
are proposed:
Contacts: allows you to select a contact from your phonebook. Use the Up or Down
buttons to select a contact from the list and press OK to confirm.
Good to know: As in the Contacts and Phone applications, you can use the alphanumeric
keypad to find your contact. The list of names is then filtered as you type. The filter is
performed at the beginning of the First and Last Name. You can browse the list of filtered
contacts at any time by using the Up or Down buttons. To erase a character from the filter,
press the Back button. Once the contact is found, press the OK button to confirm your choice.
Dial number: allows you to enter a phone number digit by digit. An edit box appears, type
your number using the numeric keypad and confirm your entry by pressing the OK button.
Once your correspondent has been selected, a screen to enter your message appears. Enter your
text with the physical keypad or voice recognition in the edit box and confirm by pressing the OK
button.
MiniVision2 goes back to the main screen of the Discussion of Messages application you just
created. The discussion ranks first in the list as it becomes the most recent.
Send message to multiple recipients
To send the same message to multiple recipients, follow the procedure to send a message (see
above). When the edit box for entering your text appears, press Menu to open the options. Use
the Up or Down keys to select “Recipient list” and confirm with the OK button.
The list of recipients is displayed, select a recipient and press OK button to remove it, or press
Menu and select “Add recipient” to add a new recipient for this message as described earlier.
Press Back to return to the edit box and entering the text of the message.
Transfer a message
You can transfer a message from one discussion to another of your contacts. Use the Up or Down
buttons from the Messages main screen to select the discussion that contains the message you
want to transfer, and then press the OK button. The message history appears, use the Up or
Down buttons to select the message you want to transfer, and then press the OK button to access
the options related to that message. Use the Up or Down buttons again to select "Transfer" and
confirm with the OK button. The contact selection screen appears. As with sending a new
message, select the contact to whom you want to forward the message or dial the number directly.
After the contact is selected, an edit box containing the transferred message appears. Confirm the
transfer of the message by pressing the OK button.
Good to know: You can edit the transferred message or add text before sending the message.
To Next Page
Loading...
