Kapsys MiniVision2 - Write with Voice Recognition; Delete a Text; Modify a Text; Edit Box Menu

MiniVision2 – User Manual
Page 15 / 71
Write with voice recognition
In addition to voice commands, MiniVision2's voice recognition feature also allows you to write text
in an edit box with your voice.
This service also requires an internet connection (Wi-Fi or 3G / 4G via your wireless provider
subscription). If you are not connected to a data network or if the data rate is insufficient, the
service will be inoperative and MiniVision2 will inform you with a message on the "No data
connection" screen.
To write with voice recognition, press and hold the OK button in an edit box until you hear a beep.
Once you hear the beep, speak your text clearly. Voice recognition stops as soon as you stop
talking (or if you take a long break). After a while, the recognized text will be inserted into the edit
box and vocalized. If you want to make corrections, you can also edit the text with the physical
keypad as seen previously.
Here are some recommendations to use the voice recognition to write text:
 Wait for the end of the beep to start dictating your text.
 A quiet environment will improve the result of speech recognition.
 You can use the voice recognition as much as you want within the edit box and it will
concatenate resulting texts.
 You can add punctuation to the voice (“,” “?” “!” etc.), to do this you need to vocally.
pronounce the desired punctuation. Example: "Do you want to eat Sunday at home
question mark".
 Speech recognition uses the context of the sentence. It will therefore be more relevant with
long sentences than with small groups of words.
Delete a text
In an edit box, a short press on the Back button will delete the last character entered.
To delete all entered text, pressing and hold the Back button.
Modify a text
In an edit box, you can use the Left or Right buttons to move the cursor and delete or add a
character, a word or a phrase.
Down button allows to set the navigation mode, you can select Character or Word.
Left button moves the cursor to the left in an edit box. The Right button moves the cursor to the
right in an edit box.
Long press on Left key or Right button moves respectively the cursor to the beginning or to the
end of the text.
Good to know: It is not possible to change the audio volume of MiniVision2 when editing text
because the Left and Right buttons are assigned to the cursor movement.
Edit Box menu
When an edit box is displayed on the screen, you can press Menu to access the following options:
 Save: saves the changes made in the edit box
 Dismiss: cancels the changes made in the edit box
 Delete all: delete all text in the edit box
 Copy all: copy all text of the edit box into the clipboard
 Cut all: copy and then erase all text of the edit box and copy it into the clipboard
 Paste all: insert the content of the clipboard into the edit box