MiniVision2 – User Manual
Page 58 / 71
bring up additional options related to that network. Then use the Up and Down keys to
select one of the following two options:
o Connect / Disconnect: allows you to connect to a stored network or disconnect
from the current Wi-Fi router.
o Forget it: removes the Wi-Fi router from the list of known networks.
Scan networks: to open the search screen for available Wi-Fi around you. Select the Wi-Fi
router you wish to reach with the Up and Down buttons and press the OK button to connect
to it. For connection to a secure Wi-Fi router, a password is required. Enter the password of
your Wi-Fi router in the modification zone and confirm with the OK button. At the end of the
procedure, MiniVision2 informs you about the status of the Wi-Fi connection and returns
you to the list of settings.
Good to know: Some set-top boxes provide Wi-Fi connection for both 5Ghz and 2.4GHz bands.
MiniVision2 is only compatible with the Wi-Fi 2.4Ghz band. If your router network name (SSID)
does not appear when searching for Wi-Fi networks, check that the 2.4GHz band of your router is
activated. To do this, go to settings on your router (contact your provider if needed), make sure
that both Wi-Fi 5Ghz and 2.4Ghz frequency bands are enabled and each network have a different
network name (SSID).
Good to know: If the Wi-Fi connection has failed, it means that the password entered is probably
not correct. Check the password, especially if the password is case sensitive. In case of error,
return to the "Known networks" to forget this network and then try again in the "Scan networks"
option.
Good to know: To extend the battery consumption, turn off the Wi-Fi connection when you are not
using it.
Network
This category is used to manage the MiniVision2 network settings:
Airplane mode: allows you to disable all sources of radio transmission of the product (Wi-
Fi, Bluetooth and cellular network connection). By default, "Airplane Mode" is disabled.
Mobile data: allows you to activate or deactivate the use of internet data of your telephone
subscription. By default, "Mobile Data" is enabled. If you disable this option, the Weather
application, software updates, premium voice downloads and speech recognition will only
work via Wi-Fi.
Data roaming: allows you to activate or deactivate the use of internet data of your
telephone subscription when you are abroad. By default, "Data roaming" is enabled. It is
sometimes necessary to activate data roaming with some service providers to be able to
access the internet even in your country.
4G call: allows to activate or deactivate the 4G for call. Check with your wireless network
carrier is this option is available.
Security
This category allows you to manage MiniVision2 security settings such as changing the PIN code
or adding a phone lock screen:
SIM card lock: this option is available only when a SIM card is inserted in MiniVision2. It
allows to disable the PIN code of your SIM card or to modify it. Two options are available:
o Lock SIM card: allows you to define whether your SIM card is locked or not. If you
deactivate “Lock SIM card”, you will no longer have a PIN code to enter when you
start the phone.
o Change SIM PIN: allows you to change the default PIN code of your SIM card. Enter
your old PIN code using the numeric keypad and confirm with the OK button. A new
edit box appears, enter your new PIN code and confirm with the OK button. Finally,
enter your new PIN again and validate with the OK button to confirm the change.
To Next Page
Loading...
