MiniVision2 – User Manual
Page 30 / 71
Managing Messages in Chronological mode
In Chronological mode, messages are sorted into 4 folders:
Inbox: this folder contains messages that your correspondents have sent you.
Sent: this folder contains messages that you have sent to your correspondents.
Outbox: this folder contains messages that could not be sent (for example, unavailability of
the network or wrong phone number)
Draft: this folder contains messages typed but not sent.
By default, the Messages main screen only displays received messages.
To change the category, press Menu and make your selection with the Up or Down buttons then
confirm with the OK button.
In each category, messages are sorted in chronological order, the most recent at the top of the list.
Every message has the following format: Status (sent message, read message, unread message,
draft message, or sending message), Contact Name (or Phone Number if unknown), Date, Time
and Message Content.
Send a new message
From the Messages application main screen and from any category, press Menu, then select
“New message” with the Up or Down buttons and confirm with the OK button. A contact selection
screen appears. Two options are proposed:
Contact: allows you to select a contact from your phonebook. Use the Up or Down buttons
to select a contact from the list and press OK to confirm.
Good to know: As in the Contacts and Phone applications, you can use the alphanumeric keypad
to find your contact. The list of names is then filtered as you type. The filter is performed at the
beginning of the First and Last Name. You can browse the list of filtered contacts at any time by
using the Up or Down buttons. To erase a character from the filter, press the Back key. Once the
contact is found, press the OK button to confirm your choice.
Dial number: allows you to enter a phone number digit by digit. An edit box appears, type
your number using the numeric keypad and confirm your entry by pressing the OK button.
Once your correspondent has been selected, an edit box invites you to enter your message. Enter
your text with the physical keypad or voice recognition in the edit box and confirm the sending by
pressing the OK button.
Once the message is sent, MiniVision2 goes back to the main screen of the Messages application
displaying the “Inbox” folder.
Send a message to multiple recipients
To send the same message to multiple recipients, follow the procedure to send a message (see
above). When the edit box for entering your text appears, press Menu to open the options. Use
the Up or Down buttons to select “Add Recipient” and confirm with the OK button. The contact
selection screen appears. As described earlier, select your contact or dial the number directly. The
edit box to insert your text appears again.
Repeat the process to add another contact or enter your text (with the physical keypad or voice
recognition). Confirm the sending by pressing the OK button. Once the message is sent,
MiniVision2 goes back to the main screen of the Messages application displaying the “Inbox”
folder.
Transfer a message
You can transfer a message to one of your contacts. Use the Up or Down buttons from the
Messages main screen to select the folder that contains the message you want to transfer, and
then press the OK button. Use the Up or Down buttons to select the message you want to
transfer, and then press the OK button to access the options related to that message. Use the Up
or Down buttons again to select "Transfer" and confirm with the OK button. The contact selection
screen appears. As with sending a new message, select the contact to whom you want to forward
To Next Page
Loading...
