MiniVision2 – User Manual
Page 59 / 71
Phone lock: adds an additional lock screen when the phone goes out of sleep mode. You
can choose one of the following three options:
o No locking: allows not to put lock screen. By default, "No locking" is selected.
o Locking by code: allows you to set a 4-digit lock code. Enter your code in the entry
field and confirm with the OK button. Enter the code a second time and validate with
the OK button to confirm the lock code. When the phone goes out of sleep mode,
you will have to enter your personal code then validate with the OK button to access
the contents of your phone.
o Locking by keypad: add a keypad lock screen. When the phone goes out of sleep
mode, you will need to press and hold the Star key to access the contents of your
phone.
Show Passwords: allows the pin code and phone lock code to be visible and vocalized. By
default, "Show Passwords" is enabled. This means that the characters typed in the pin code
entry and unlock code fields of the phone will be displayed and vocalized. If you disable this
option, MiniVision2 will replace the characters displayed with asterisks to maximize the
privacy of your personal codes.
Good to know: PIN code and phone unlock code passwords are always announced when using
the MiniVision2 headphones.
Language
This category defines the language of MiniVision2 and speech synthesis:
Use the Up and Down buttons to navigate through the list and confirm your choice with the OK
key. A confirmation screen is then displayed. To confirm the language changing, select "Yes" and
confirm with the OK button.
Keypad
This category allows you to manage MiniVision2 keypad settings:
Vibration feedback: allows you to play a vibration when you press a key on the physical
keypad to confirm that the action has been taken into account. By default, "Vibration
feedback" is disabled.
Sound feedback: allows you to play an audible signal when you press a key on the
physical keypad to confirm that the action has been taken into account. By default, "Sound
feedback" is enabled.
Vibration after character input: allows you to play a vibration when a character is
validated in an input area. By default, "Vibration after character input" is disabled.
Sound after character input: allows you to play a sound signal when a character is
validated in an edit box. By default, "Sound after character input" is enabled.
Input character validation delay: allows you to define the delay after which a character
typed in a modification zone is validated. Five times are available: "0.3 second", "0.5
second", "1 second", "2 seconds", "3 seconds". By default, "1 second" is selected. Press
the OK button to modify, then use the Up and Down buttons to select another delay and
confirm your choice with the OK button.
Pick up with keys 0-9: allows you to pick up a call using any key on the numeric keypad
(useful for people with sensory impairment or difficulties identifying the Call button). By
default, this setting is enabled.
Quick Access: allows you to associate an application or a contact to a numeric key on the
keyboard for quick access. Once the application or the contact associated, you can long
press the key programmed to directly start the application or start the call directly from the
home screen. Use the Up and Down buttons to select a number key on which you want to
associate a contact or an application and confirm with the OK button (by default, key 1 is
reserved for voicemail). Then select one of the following two options:
To Next Page
Loading...
