MiniVision2 – User Manual
Page 9 / 71
To the right of the OK button are located Back and End call buttons, respectively one above the
other and separated by a horizontal bar:
Back button of rectangular shape and symbolized by a triangle, allows you to return to the
previous screen or deletes a character in an edit box.
End call button symbolized by three horizontal and tactile red dots, hangs up the current
call, refuses a call, returns to the home screen or allows you to exit from the standby mode
with a short press. It turns the MiniVision2 on or off with a long press.
The second part of the physical keypad is the alphanumeric keypad that allows you to insert
content into the MiniVision2. It is composed of 12 keys (4 rows of 3 keys):
1
st
row - 1, 2, 3 keys
2
nd
row - 4, 5, 6 keys
3
rd
row - 7, 8, 9 keys
4
th
row - star, 0, pound (number sign or hash) keys.
An ergonomic mark is present in relief on the key 5.
The use of the alphanumeric keypad is described in the chapter « Write with physical keypad ».
Top edge
On the top edge of the phone, a LED is available for Torch application.
Lower edge
From left to right, there are respectively the 3.5 mm audio jack connector to plug an external audio
headset, the Micro-USB connector to charge the phone and the charging cradle connectors.
Back Panel
From left to right, there are respectively the camera used by “Camera” / “Color detector” /
“Banknote detector” / “Light detector” applications, the Emergency button used by “S.O.S.”
application and the loudspeaker.
The MiniVision2 back cover is fully removable and provides access to the battery, SIM card slot
and micro SD card.
To Next Page
Loading...
