MiniVision2 – User Manual
Page 52 / 71
Emergency
MiniVision2 is equipped with an Emergency function which makes it possible to make calls or send
geo-localized emergency messages to predefined contacts (up to 10).
Caution: KAPSYS can under no circumstances be held responsible for any direct or indirect
damage related to a failure of the Emergency function that is due to a technical problem of the
product or the unavailability of the operating network.
Enable/ Disable the Emergency function
With the Emergency application, you can schedule the "automatic" sending of an alert in the form
of a phone call or a message or both to one or more people you have chosen.
To start the process, press and hold the Call button for 5 seconds.
To stop the process, press and hold the Call button for 5 seconds.
Good to know: a warning screen appears when the Emergency process is enabled.
Set the Emergency function
Before using the Emergency function, you must define the application settings:
Emergency button: activates or deactivates the Emergency function triggering via the Call
button. By default, the Emergency button is disabled.
Activation delay: adjusts the pressure delay after which the Emergency process is
triggered. Two delays are available: 3 or 5 seconds. By default, "5 seconds" is selected.
Press the OK button to modify, then use the Up and Down buttons to select another delay
and confirm your choice with the OK button.
Play an alarm: enable the transmission of a powerful audible alert when the Emergency
process is activated. By default, "Play an alarm" is not activated.
Set Phone Numbers: allows you to define the phone numbers of people you want to call or
send a text message to, in case of emergency. You can set up to 10 emergency phone
numbers. These emergency phone numbers are numbered from 1 to 10. When the
Emergency process is started, the first phone number of the list is used to call and/ or send
your predefined text message, then the second phone number, the third phone number and
so on until the 10
th
phone number. By default, no phone number is filled. Use the Up and
Down buttons to navigate through the list and press the OK button to assign a phone
number to a position. Two options are then proposed:
o From Contact list: allows you to select a contact from your contacts list. Then use
the Up and Down buttons to select your contact and confirm with the OK button. The
list of numbers is then displayed with your contact correctly assigned to the position
previously selected.
o Set Phone Number: dials a phone number manually. Enter a phone number in the
edit box and confirm the registration with the OK button. The list of numbers is then
displayed with the phone number correctly assigned to the position previously
selected.
Phone call: enables phone calls to your emergency numbers when the Emergency process
is enabled. The persons will be contacted one by one in the order defined in the "Set Phone
Numbers" list until the acceptance of the call. By default, "Phone call" is not activated.
When you enable this feature, the "Answer delay" option is displayed.
Answer delay: allows you to set the delay before going to the next number if the current
call is unanswered. Three delays are available: "15 seconds", "30 seconds", "45 seconds".
By default, "30 seconds" is selected. Press the OK button to modify, then use the Up and
Down buttons to select another delay and confirm your choice with the OK button.
To Next Page
Loading...
