MiniVision2 – User Manual
Page 35 / 71
Stop an alarm
When an alarm rings, a screen with the following options appears:
Time: allows you to know the time of the alarm that is ringing
Stop: to stop the alarm
Snooze: allows you to stop the alarm and have it ring again 10 min later.
Use the Up and Down to select "Stop" or "Snooze", then confirm the action by pressing OK.
Pressing the Back button also stops the alarm.
Good to know: MiniVision2 needs to be turned on or be in sleep mode for the alarm to ring at the
chosen set time. Should the phone be turned off, the alarm will not ring.
Edit an alarm
From the main screen of the Alarm application, use the Up and Down buttons to select the alarm
you wish to change and confirm with the OK button.
The alarm opens in edit mode, then use the Up and Down buttons to select the field you want to
change from the following: Status, Time, Ringtone, and/ or Repeat.
Follow the same procedure as for « Add an alarm ».
After editing, press Menu to open the options screen. Then use the Up and Down buttons to
select "Save" and confirm with the OK button.
Good to know: Pressing the Back button also saves the alarm if at least one of the fields has been
modified.
To cancel changes made to an alarm, press Menu to open the options screen and then use the
Up and Down buttons to select "Dismiss". Confirm the cancellation with the OK button.
Enable / Disable an alarm
From the main screen of the Alarm application, use the Up and Down keys to select the alarm you
want to activate or deactivate and confirm with the OK button.
The alarm opens in edit mode, then use the Up and Down buttons to select the Enabled/ Disabled
field and press the OK button to change the status.
Press the Back button to save the status change.
Delete an alarm
From the main screen of the Alarm application, use the Up and Down buttons to select the alarm
you want to delete and confirm with the OK button. The alarm opens in edit mode. Press Menu to
open the options screen, then use the Up and Down buttons to select "Delete" and confirm with
the OK button. A delete confirmation screen appears. Select "Yes" and confirm with the OK button
to confirm the deletion. Otherwise, select "No" and confirm with the OK button to cancel the
deletion.
Delete all alarms
To delete all alarms, press Menu from the main screen of the Alarm application and select "Delete
All" with the Up and Down buttons and confirm with the OK button. A delete confirmation screen
appears. Select "Yes" and validate with the OK button to confirm the deletion of all alarms.
Otherwise, select "No" and confirm with the OK button to cancel the deletion.
Set the default ringtone
This option allows you to set a default ringtone for all new alarms. From main screen of the Alarm
application, press Menu and select “Default ringtone”. The list of available ringtones is displayed,
use Up or Down to select your preferred default ringtone and press OK to confirm.
To Next Page
Loading...
