Kapsys MiniVision2 - Phone Operations; Call Management and History; Making Phone Calls

MiniVision2 – User Manual
Page 18 / 71
Phone
The Phone application allows you to make calls, view your voice mails and call history. You can
access the Phone application at any time by pressing the Call button.
Answer an incoming call
When the phone rings, press the Call button to answer the incoming call. The Call button is
located at the left end of the navigation panel, below the Menu button. It is symbolized by three
vertical green, tactile dots.
By default, the "Pick up call with keys 0-9" setting is enabled, which allows you to accept an
incoming call by pressing any alphanumeric keys on the physical keypad. For more information,
please refer to the « Keypad » section of the MiniVision2 settings.
Good to know: When the phone rings, you can mute the phone and hear the caller ID by pressing
the Left or Right button. To repeat the caller ID, press the Up or Down button.
Release a call
To end a call, press the End call button positioned at the right end of the navigation panel, under
the Back button. It is symbolized by three horizontal red dots.
Reject an incoming call
To reject an incoming call, press the End call button.
Make a phone call
From Home Screen, use Up or Down buttons to select one of the following four options:
 Call contact: allows you to select a contact from your phonebook. Use the Up or Down
buttons to select a contact from the list and start the call by pressing the OK button.
Good to know: as in the Contact and Messages applications, you can use the alphanumeric
keypad to find your contact. The list of names is then filtered as you type. The filter is
performed at the beginning of the First and Last Name. You can browse the list of filtered
contacts at any time by using the Up or Down buttons. To erase a character from the filter,
press the Back button. When the contact is found, press the OK button to initiate the call.
 Dial: allows you to enter a phone number digit by digit. When an edit box appears, type
your number using the numeric keypad then confirm the entry and start the call by pressing
the OK or Call buttons.
Good to know: You can also dial a phone number directly from the home screen or the
Phone application main page. To do this, press the keys on the numeric keypad to dial your
number digit by digit then confirm your entry and start the call by pressing the OK or Call
button.
 Call history: allows you to call back a contact or a phone number from the past calls. Use
the Up or Down keys to select the number you want to recall and press the OK button to
open the options screen. Use the Up or Down buttons again to select "Call" and confirm
with the OK button.
 Voicemail: allows you to call your voicemail to listen to your messages.