MiniVision2 – User Manual
Page 44 / 71
Color Detector
The Color Detector application allows you to use your MiniVision2 for color recognition and
detection. Once the application is launched, three options are available:
Announce colors
This feature allows you to use the MiniVision2 camera to announce the color of the object you are
targeting. The announcement of the color is repeated every second or when the color changes.
To optimize the result of the detection, it is advised to point the back-side camera at a distance of
4 to 6 inches from the target, in a well-lighted aera.
The list of colors that MiniVision2 can detect is: Red, Burgundy, Brown, Orange, Yellow, Yellow-
green, Green, Emerald, Turquoise, Blue, Ultramarine, Purple, Fuchsia, Pink, White, Grey, Black.
An information about the shade will sometimes be added after the color: pale, light, dark, very
dark.
Find Color
This feature allows you to use the product's camera to find a color. This allows you to find an
object quickly if you know its color. Select with the Up and Down buttons the color you want to
detect from the list of available colors.
Press the OK button to confirm the color you want to detect and finally point the rear camera to the
object. An audible signal is emitted when the selected color is detected. You can change the
warning mode by selecting the third option of the application that is "Alert to find a color".
Alert to find a color
Change the type of announcement when using the "Find a color" feature. Three options are
available:
Sound: an audible signal is emitted when the color is detected.
Vibration: a vibration is played when the color is detected.
Sound and Vibration: a sound signal and a vibration are played when the color is detected.
To Next Page
Loading...
