MiniVision2 – User Manual
Page 39 / 71
Camera
The Camera App allows you to take picture by using the camera on the back of the MiniVision2.
To take a picture
When you launch the camera application, the image from the camera is displayed on the screen.
A beep is also emitted every 3 seconds to let you know that the camera is switch on. Point the
camera to the object or scene you want to capture and press the OK button to take the picture. A
characteristic sound will be heard when the picture is taken.
The photo is then automatically saved in the internal memory of the MiniVision2 into “DCIM” folder.
The photo can then be viewed in the "Gallery" application.
Good to know: The Menu key in the camera application gives you a direct access to the "Gallery"
application which allows you to consult your pictures.
Good to know: The beep emitted every 3 seconds can be disabled via the parameter "Play a
sound when the camera or the LED is activated" available in the general parameters of the
MiniVision2 under "Vocalization".
To Next Page
Loading...
