MiniVision2 – User Manual
Page 33 / 71
Notification: sets the notification mode for the arrival of a new message. Two options are
available:
o Mode: allows you to set the notification mode for the arrival of a new message. Four
methods are available. "None", "Vibration", "Sound", "Sound and Vibration". By
default, "Sound" is selected. Press the OK button to edit, then use the Up or Down
buttons to select another method and confirm your choice with the OK button.
o Sound: allows you to set the alert sound when a new message arrives. By default,
the sound "Adara" is selected. Press OK to change the notification sound. Use the
Up or Down buttons in the list. The selected sound is played automatically for a few
seconds. Confirm your choice with the OK button. The sound is saved, and the
notification screen is displayed again.
o Sender notification: allows vocal notification of the sender when a message is
received. When this option is enabled, the vocalization of MiniVision2 will announce
the name of the contact who sent the message, or the phone number if the sender is
not in your phonebook.
SMS (text message) service center: allows you to set the host number for reception or
sending of text messages. By default, this number is pre-filled automatically according to
your operator when the SIM card is inserted into the MiniVision2. Press the OK button if
you want to edit or correct this number.
Reset APN: Resets access point names (APN) used to access the Internet and receive
MMS messages via your SIM card
Good to know: You can add your own notification sounds for new messages in MiniVision2. To do
so, connect MiniVision2 to your computer via the USB cable. MiniVision2 is recognized as an
external storage memory. Open the “MiniVision2” folder and then select “Internal Storage
Memory”. Copy your sounds in MP3 format into the "Notifications" folder. Your new message
notification sounds will then be added into the sound list and will be identified with the title of the
MP3 file.
To Next Page
Loading...
