EasyManua.ls Logo

Kärcher MC 130 - Position of the Symbols on the Vehicle; Safety Devices

Kärcher MC 130
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 63
Position of the symbols on the vehicle
Note
Immediately replace illegible or absent symbols.
Safety devices
Safety devices protect the user and may not taken out of opera-
tion or functionally circumvented.
Adhere to the safety instructions in the chapters!
Main switch
The main switch interrupts the electrical supply line to the starter
motor.
Always disconnect the battery after parking the vehicle (Battery
disconnected position).
Start lock
Prerequisites for starting the motor:
Main switch activated (position battery connected)
Driver is sitting on the driver’s seat
Seat contact switch
When the driver's seat is vacant:
The vehicle cannot be driven.
The front PTO cannot be switched on or off.
Parking brake
The parking brake requires hydraulic pressure to release.
The parking brake is therefore applied when the engine is
switched off.
The parking brake is also applied when the engine is running and
the travel direction lever is in the NEUTRAL position.
Note
The "Parking brake applied" warning light in the multifunction dis-
play lights up when the parking brake is applied.
Driver cabin
The operator is protected from lightning strikes when sitting in the
driver cabin.
The driver cabin has a roll cage (ROPS).
The driver cabin does not have a structure providing protection
from falling objects (FOPS).

Table of Contents

Related product manuals