Kawai MP7 - SOUND;SETUP Program;Bank

139
Appendix
MIDI Implementation
4 SOUND/SETUP Program/Bank
If the Receive Mode MIDI parameter is set to Panel (page 108), the MP7 receives MIDI data on the System Channel
only. To change internal sounds via MIDI, please refer to the Program Change Number List (page 140).
* Note: If the MP7 receives the Program Number from 1 to 128 and Bank number MSB 0 or 1 in the System Channel, the MP7 will switch to SETUP mode and
the corresponding SETUP is recalled. When the Receive Mode is Section, the MP7 can be received to each internal sound sections individually.
4.1 SETUP Program Number Table
Upper Second Third Prog#:MSB-LSB
1 1 A 001:000-002
1 1 B 002:000-002
1 1 C 003:000-002
1 1 D 004:000-002
1 2 A~D 005:000-002 ~ 008:000-002
1 3 A~D 009:000-002 ~ 012:000-002
1 4 A~D 013:000-002 ~ 016:000-002
1 5 A~D 017:000-002 ~ 020:000-002
1 6 A~D 021:000-002 ~ 024:000-002
1 7 A~D 025:000-002 ~ 028:000-002
1 8 A~D 029:000-002 ~ 032:000-002
2 1~8 A~D 033:000-002 ~ 064:000-002
3 1~8 A~D 065:000-002 ~ 096:000-002
4 1~8 A~D 097:000-002 ~ 128:000-002
5 1~8 A~D 001:000-003 ~ 032:000-003
6 1~8 A~D 033:000-003 ~ 064:000-003
7 1~8 A~D 065:000-003 ~ 096:000-003
8 1~8 A~D 097:000-003 ~ 128:000-003