Kawai MP8 - Menu

30
6. MENU
The MENU buttons allow access to the edit parameters in the MP8. This
collection of settings together with other editable parameters can be stored
as a SETUP. The MP8 provides 256 SETUPs, and all are user programmable.
A SETUP consists of four zones. Each zone can be set as Internal, External
or Both individually. Inside each of the four zones, a multitude of features
and effects can be programmed and combined together into one exciting
SETUP.
A total of 256 SETUPs may be programmed in this way.
The menu consists of Internal parameters, External parameters and Common
parameters.
Common parameter affects to all zones. If a zone is set as Both, both the
Internal parameters and External parameters are available for the zone.
Use the MENU buttons to scroll through all the different parameters.
Zone parameters (Int) Zone parameters (Ext) Common parameters
Mode Mode Master Volume
Sound Selection TX Channel Expression Pedal CC#
Damper Effect (Int Piano only) TX PRG # On/Off Footswitch CC#
String Resonance (Int Piano only) PRG # Temperament
Voicing (Int Piano only) TX Bank On/Off Stretch Tuning
Key Range Hi/Lo Bank Select MSB LSB
Velocity Switch On/Off Key Range Hi/Lo
Velocity Switch Value Velocity Switch On/Off
Velocity Compression Velocity Switch Value
Velocity Offset Velocity Compression
Zone Transpose Velocity Offset
Volume Zone Transpose
Pan TX Volume On/Off
Fine Tune Volume
Damper Pedal On/Off/Hold TX Controller On/Off
Footswitch On/Off Pan
Expression Pedal On/Off Fine Tune
Modulation On/Off Damper Pedal On/Off
Bender On/Off Footswitch On/Off
Bender Range Expression Pedal On/Off
Solo On/Off Modulation On/Off
Solo Mode Bender On/Off
TX Bender Range On/Off
Bender Range
Solo On/Off
Solo Mode
Caution:
The edited settings will be erased when the power is turned off, or other
sound is recalled. To save these settings, use the STORE procedure to
save them as a SETUP. (see p.XX)