Kawai MP8 - Channel Mode Message

61
01H 64H mmH Decay time mm:00H - 7FH(-64 - 0 - +63) Default = 40H
01H 66H mmH Release time mm:00H - 7FH(-64 - 0 - +63) Default = 40H
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the dcf.
RPN MSB/LSB
Status 2nd Byte 3rd Byte
BnH 65H mmH
BnH 64H llH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP8 are the followings
RPN # Data
MSB LSB MSB Function & Range
00H 00H mmH Pitch bend sensitivity
mm:00H-0cH(0-12 half tone) Default=02H
ll:00H
00H 01H mmH Master fine tuning
mm,ll:20 00H - 40 00H - 60 00 (-8192x50/8192 - 0 +8192x50/8192 cent)
00H 00H mmH Pitch bend sensitivity
mm:00H - 07H(0 - 7 half tone) Default = 02H
ll:Ignored(as 00H)
00H 01H mmH Master fine tuning
mm,ll:00 00H - 40 00H - 7f 7f (-8192x100/8192 - 0 +8192x100/8192 cent)
00H 02H mmH Master coarse tuning
mm:28H - 40H - 58H(-24 - 0 - +24 half tone)
ll:Ignored(as 00H)
7fH 7fH -- RPN NULL
Program Change
Status 2nd Byte
CnH ppH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
pp=Program number :00H - 7fH(0 - 127) Default = 00H
Pitch Bend Change
Status 2nd Byte 3rd Byte
EnH llH mmH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
mm,ll=Pitch bend value :00 00 - 7f 7fH(-8192 - 0 - +8192) Default = 40 00H(center)
1.2 Channel Mode Message
All Sound OFF
Status 2nd Byte 3rd Byte
BnH 78H 00H
n=MIDI channel number :0H-fH(ch.1 - ch.16)