Kawai MP8 - System Rest; Reset One SETUP; Reset All; System EFX;REVERB

46
Loading the data back to MP8 will overwrite all the data in the memory.
8.4 System Reset
8.4.1 Reset One SETUP
This function resets one SETUP back to the original factory default settings.
Press the SYSTEM button. Use the MENU buttons to select “Reset X-X-
X” (X-X-X stands for the setup number). Now use the SOUND SELECT
buttons to select the setup you want to reset.
Press the VALUE-UP button. The display will ask for confirmation.
To cancel the Reset procedure at this point, press the VALUE-DOWN button.
Otherwise, press the VALUE-UP button again.
The display will show “Completed!!” after finishing.
Note:
The selected SETUP data will be overwritten by the factory settings. If
you are in Sound mode, this function is not available.
8.4.2 Reset All
This function performs a global reset of all 256 SETUPs and SYSTEM
settings back to the original factory default settings.
Press the SYSTEM button. Use the MENU buttons to select “Reset All”.
Press the VALUE-UP button. The display will ask for confirmation.
To cancel Reset All at this point, press the VALUE-DOWN button.
Otherwise, press the VALUE-UP button again.
The display will show “Completed!!” after finishing.
Note:
All the data in the MP8 will be overwritten by the factory settings.
Reset 6-4-A
Press VALUE UP
Reset 6-4-A
Sure?
Reset 6-4-A
Completed!!
Reset All
Press VALUE UP
Reset All
Sure?
Reset All
Completed!!
8.5 System EFX/REVERB
Each internal sound has a preset effect assigned as the default.
These functions change the default of the EFX/REVERB settings.
Note: If you are not in Sound mode. this function is not available.
8.5.1 Save EFX/REVERB
This function saves the EFX/REVERB settings of the selected one sound.