Kawai MP8 - Other; MIDI in; SETUP Program Number Table

48
9. OTHER
9.1 MIDI IN
When the Multi-Timbral Mode is Off, the MP8 receives the MIDI information
coming in the System Channel only. (See page 39.)
For changing the internal sounds via MIDI, refer to the SOUND Program
Number List on the next page.
Note:
If the MP8 receives the Program Number from 1 to 128 and Bank number
LSB from 2 to 3 in the System Channel (See page 39.), the MP8 will
switch to SETUP mode and the corresponding SETUP is recalled. (See
the SETUP Program Number Table below.) The recalled SETUP can be
played only from the keyboard of the MP8.
When the Multi-Timbral Mode is On, the MP8 can be used as a multi-timbral
sound module, playing up to 16 different sounds on 16 MIDI channels.
9.2 SETUP Program Number Table
UPPER SECOND THIRD PROG#:MSB-LSB
1 1 A 001:000-002
1 1 B 002:000-002
1 1 C 003:000-002
1 1 D 004:000-002
1 2 A~D 005:000-002 ~ 008:000-002
1 3 A~D 009:000-002 ~ 012:000-002
1 4 A~D 013:000-002 ~ 016:000-002
1 5 A~D 017:000-002 ~ 020:000-002
1 6 A~D 021:000-002 ~ 024:000-002
1 7 A~D 025:000-002 ~ 028:000-002
1 8 A~D 029:000-002 ~ 032:000-002
2 1~8 A~D 033:000-002 ~ 064:000-002
3 1~8 A~D 065:000-002 ~ 096:000-002
4 1~8 A~D 097:000-002 ~ 128:000-002
5 1~8 A~D 001:000-003 ~ 032:000-003
6 1~8 A~D 033:000-003 ~ 064:000-003
7 1~8 A~D 065:000-003 ~ 096:000-003
8 1~8 A~D 097:000-003 ~ 128:000-003