KBL 3500 - Page 11

11
Operating Instructions KBL 3500
1
4
3
2
6
5
1 Display Shows “KBL” in standby mode.
2 next Alternates between the menus available
in the current operating mode.
3 START
button
Starts the tanning session:
During warm-up time
After suspending the session with the STOP button,
if the available tanning time has not elapsed yet.
•
•
4 STOP button Suspends the tanning session if pressed
for at least two seconds.
5 Plus button In tanning mode: Increases the value of
the function shown underneath.
In service mode: Executes the function shown underneath.
6 Minus button In tanning mode: Decreases the value of
the function shown underneath.
In service mode: Executes the function shown underneath.
Control panelControl panel