41
Operating Instructions KBL 3500
Fold up the canopy of the sunbed.
Undo the two fl at-head screws on the left-hand and right-hand side of the
bed pane.
Lift the pane so that you are able to take out one of the pane holders
located behind the front edge. Lift the pane further and erect the pane
holder beyond the resistance point so that the rod stays in the fi tting.
Repeat this procedure for the second pane holder so that the pane rests
on both holders.
1.
2.
3.
Bed Bed
To Next Page
Loading...
