KEB COMBIVERT F5 Instructions For Use

4.2 Cooling system
The KEB COMBIVERT in P housing is available with air and liquid cooling system.
The system manufacturer must ensure the dissipation of the power loss.
ATTENTION
► When connecting the cooling circuit, absolutely observe the instruc-
tions in chapter => Operation of liquid-cooled devices.
► Even brief interruptions of the cooling circuit can destroy the device.
CAUTION
High temperatures at heat sink and coolant !
Burning of the skin !
► Cover hot surfaces in a touch-safe manner.
► Allow the device to cool down before carrying out any work.
► If necessary, attach warning signs to the system.
► Check the surface and coolant lines before touching them.
48
MECHANICAL INSTALLATION

KEB COMBIVERT F5 Specifications

General

Category	DC Drives
Enclosure Rating	IP20
Control Mode	Vector Control, V/f Control
Protection	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Fieldbus Communication	PROFIBUS, CANopen
Communication Interfaces	RS-485
Input Voltage	380-480V AC
Cooling Method	Forced air cooling (fan)