To Next Page

To Previous Page

Parameter sets

ID IB I3 I2 I1 Set Set

Set

Fr.02 = 3 4

0 0 0 0 0 0 0

0 0 0 0 1 1 1

0 0 0 2 0 2 2

0 0 3 0 0 3 3

0 4 0 0 0 4 4

5 0 0 0 0 5 5

5 0 3 0 0 3 5

5 0 3 0 1 1 5

Reset set input selection (fr.11)

ParameterFr.11denesaninput,independent of the actual parameter set it can be switched in parameter set

0. This function is only active at Fr.02 = 2...4

- with static input assignment the inverter remains in set 0 as long as the input is set.

- with edge-triggered inputs set 0 is activated with the 1st edge. With the 2 nd edge the set activated by

the other inputs is selected again.

3.7.7 Locking of parameter sets

Fr.03 Parameter set lock

Parameter sets, which shall not be selected, can be locked with Fr.03. If one of the locked sets is selected, the

adjusted response in Pn.18isexecuted(default:setsourceerrorE.SEt).

Value Locked set Example (set 2 and 5 locked)

1 0 -

2 1 -

4 2 4

8 3 -

16 4 -

32 5 32

64 6 -

128 7 -

Sum:36

3.7.8 Parameter set ON/OFF delay (Fr.05, Fr.06)

KEB COMBIVERT R6-N User Manual

Questions and Answers: