3-16
EN
Instrument and control functions
3
With the engine turned o:
1. Move the side stand down.
2. Make sure that the start/engine stop switch is set to “
”.
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Press the electric start button.
Does the engine start?
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down.
Does the engine stall?
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Press the electric start button.
Does the engine start?
The system is OK. The motorcycle can be ridden.
NO
NO
NO
YES
YES
YES
The neutral switch may not be working correctly.
The motorcycle should not be ridden until a Keeway deal-
er checks it.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until a Keeway deal-
er checks it.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until a Keeway deal-
er checks it.
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk
To Next Page
Loading...
