KEEWAY K-LIGHT 125 - Page 144

4-2
EN
4
For your safety - pre-operation checks
ITEM CHECKS
Front brake
• Check operation.
• If soft or spongy, have Keeway dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check uid level in reservoir.
• If necessary, add specied brake uid to specied level.
• Check hydraulic system for leakage.
Rear brake
• Check operation.
• If soft or spongy, have Keeway dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check uid level in reservoir.
• If necessary, add specied brake uid to specied level.
• Check hydraulic system for leakage.
CBS system
• Check uid level in reservoir.
• If necessary, add specied brake uid to specied level.
• Check hydraulic system for leakage.
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever clearance.
• Adjust if necessary.
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip clearance.
• If necessary, have Keeway dealer adjust throttle grip clearance and lubricate cable and grip housing.
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk