20
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
5.3 Bottom Panel
• Rubber feet are found on the bottom panel of each speaker to prevent slipping on a
hard surface.
• Additionally, four threaded holes (M8 × 1.5) are also available for mounting on a stand
(remove the rubber feet first before mounting). For the best sound performance and
cable management, use the KEF S2 speaker stands.
WARNING!
Be aware of the potential hazards from tipping or knocking the speakers off the stands
which may result in personal injury, or property damage.
To Next Page
Loading...
