KEF LS50 Wireless II User Manual

7
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
3. In the Box and Unpacking
NOTICE!
Risk of damage!
Using a sharp knife or other pointed object to open the packaging may damage the
speakers.
• Be very careful when opening the packaging. Follow the instructions on the packaging
to lift up the speakers from the sides to avoid damaging the Uni-Q drivers (speaker
cones).
×2
×1 ×1 ×2 ×3
1. Take the speakers and accessories out of the packaging.
2. Remove the red protective stickers and tabs on the speakers.
3. Check to make sure that all parts are included, namely:
• Speaker ×2 (Primary Speaker ×1, Secondary Speaker ×1)
• Remote control ×1 (with 2 AAA batteries)
• Inter-speaker cable ×1 (length: 3 m)
• Power cable ×2 (length: 2 m, with country-specific power plugs)
• Printed materials: Quick Start Guide, Safety Information and Warranty Information
4. Check whether the speakers or individual parts are damaged. If this is the case, do not
use the speakers. Contact your retailer via the contact information indicated on the
warranty information.

KEF LS50 Wireless II Specifications

General

Max SPL	108dB
Wired Outputs	Subwoofer output
Drivers	Uni-Q Driver Array
Type	Wireless Speaker System
Connectivity	Wi-Fi, Bluetooth
Wi-Fi	802.11a/b/g/n/ac
Wireless Streaming Features	AirPlay 2, Google Chromecast
Streaming Services	Spotify Connect, Tidal Connect, Amazon Music, Qobuz, Deezer
Inputs	HDMI eARC, Optical, USB Type A
Drive Units	5.25" Aluminium woofer, 1" Aluminium dome tweeter
Woofer	5.25" Aluminum
Tweeter	1" Aluminium dome
Dimensions	305 x 200 x 311 mm (H x W x D)
Finish Options	Carbon Black, Mineral White
Weight	10 kg per speaker