KEF LS50 Wireless II - 13. Playback with Auxiliary Input; 13.1 Auxiliary Cable Connection

44
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
13. Playback with Auxiliary Input
You can connect your devices with 3.5 mm audio output (e.g. turntables, computers,
portable music players) to the speakers through an audio cable. The speakers must
always be first connected to your local network before auxiliary connection.
13.1 Auxiliary Cable Connection
Connect the audio output jack of your device and the auxiliary input jack (X) on the back
of the Primary Speaker via a 3.5 mm audio cable.