Keithley 2001

C
Calibration Messages
C-1
Introduction
This appendix lists all calibration errors that may occur dur-
ing calibration as well as the :CAL:PROT:DATA? response.
Error summary
Table C-1 summarizes Model 2001 calibration errors. The
error string returned over the bus by the :SYST:ERR? query
include the error ID code and message separated by a
comma and the message surrounded by quotes. For exam-
ple:
+438, “Date of calibration not set”
Calibration data query response
Table C-2 lists the response to the :CAL:PROT:DATA?
query. The response is an ASCII string of 99 numbers sepa-
rated by commas, and is not affected by the FORMAT com-
mand. Constants listed in Table C-2 are shown in the order
they are sent.