Model 2701 Instrument Networking Instruction Manual Software and Drivers 4-11
Procedure to start Keithley configuration wizard
1. To start the configuration utility and wizard, open the “Keithley Configuration Panel”.
From the Start Menu, select:
Programs>>Keithley Instruments>>Keithley Configuration Panel
2. Follow the wizard’s prompts. Figure 4-4 through Figure 4-10 contains an example ses-
sion of using the wizard.
3. Exit the utility. To access the utility again, select “Show Wizard” from the Help menu.
Figure 4-4
Keithley configuration wizard window
To Next Page
Loading...
