Keithley 6517A User Manual

IEEE-488 Reference
3-58
:TRIGger[:SEQuence[1]]
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:TCONfigure
:PROTocol <name>
:PROTocol?
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:SSYNchronous
:LINE <NRf>
:LINE?
Path to program Trigger Layer:
Loop around control source.
Set measure count (1 to 99999, or INF).
Query measure count.
Set delay (0 to 999999.999 sec)
Query delay.
Select control source (HOLD, IMMediate, TIMer,
MANual, BUS, TLINk or EXTernal).
Query control source.
Set timer interval (0 to 999999.999 sec).
Request the programmed timer interval.
Loop around control source.
Path to configure Triggers:
Select protocol (ASYNchronous or SSYNchronous).
Query protocol.
Enable (SOURce) or disable (ACCeptor) Bypass.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to configure semi-synchronous Trigger Link:
Select trigger line (1 to 6).
Query trigger line.
(Note 3)
0
IMMediate
0.1
ASYNchronous
ACCeptor
2
1
1
√
√
√
√
√
√
(Note 2)
√
√
√
√
3.24.3
3.24.4
3.24.5
3.24.6
3.24.7
3.24.8
3.24.9
Notes:
1. Defaults for continuous initiation:
:SYSTem:PRESet enables continuous initiation
*RST disables continuous initiation
2. TLINK and RTCLock (Arm Layer 1) are non-SCPI parameters for the :SOURce command. The command (:SOURce), and all the other parameters are
SCPI confirmed.
3. Defaults for count (Arm Layer 2 and Trigger Layer):
:SYSTem:PRESet sets the count to INF (infinite).
*RST sets the count to 1.
Table 3-16
:TSEQuence command summary
Command Description
Default
parameter
SCPI Ref.
:TSEQuence
:ARM
:ABORt
:TYPE <name>
:TYPE?
:TSOurce <name>
Arms selected test sequence.
Stops a test sequence in process.
Specify test; DLEakage, CLEakage, CIResistance,
RVCoefficient, SRESistivity, VRESistivity, SIResistivity,
SQSWeep, STSWeep, ALTPolarity.
Query test type.
Specify trigger source; MANual, IMMediate, BUS, TLINk,
EXTernal, LCLosure.
DLEakage
MANual
3.25.1
3.25.1
3.25.1
3.25.1
Table 3-15 (Continued)
Trigger command summary
Command Description
Default
parameter SCPI Ref.

Keithley 6517A Specifications

General

Brand	Keithley
Model	6517A
Category	Measuring Instruments
Language	English