Keithley SourceMeter 2612 Reference Manual

Series 2600 System SourceMeters Reference Manual Getting Started 1-25
Return to Section 1 topics 2600S-901-01 Rev. A / May 2006
Table 1-3
Default settings
Setting
6
Default
A/D Controls:
Auto-zero Auto
Line frequency Auto (firmware version
1.2.0 or later)
No effect (firmware versions
earlier than 1.2.0)
Beeper On
Data Store No effect
Digital output:
Output value No effect
Write protect No effect
Digits 5-1/2
Display mode (Model 2602/2612) Dual-channel
Filter: Off
Averaging type Repeat
Count 1
GPIB address No effect
Limit value:
Current limit 1A
Voltage limit 40V (2601/2602)
200V (2611/2612)
Measure:
Function Voltage
I-meter range 100mA
V-meter range 100mV
Output Off
Off state Normal
Rel Off
Current value 0.0pA
Voltage value 0mV
Ohms value 0mΩ
Watts value 0mW
RS-232 No effect
Sense mode 2-wire
6. Where applicable, settings apply to both Model 2602/2612 channels.

Keithley SourceMeter 2612 Specifications

General

Brand	Keithley
Model	SourceMeter 2612
Category	Measuring Instruments
Language	English