Need help?Do you have a question about the Kemppi FastMig X 450 and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Output Current Range | 10 - 450 A |
| Duty Cycle at 40°C | 60% at 450 A |
| Protection Class | IP 23 |
| Power Supply | 3-phase |
| Wire Diameter Range | 0.8 - 1.6 mm |
| Welding Processes | MIG/MAG, MMA |
| Cooling Method | Air-cooled |
To Next Page
