MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
CONTENTS
1. General 4
1.1 Equipment description 5
2. Installation 7
2.1 Installing mains plug 8
2.2 Installing control panel 9
2.3 Installing cooling unit 10
2.4 Installing particle filter (optional) 12
2.5 Mounting units on cart (optional) 13
2.6 Connecting TIG torch 15
2.7 Connecting earth return cable and clamp 16
2.8 Connecting MMA electrode holder 17
2.9 Installing remote control 18
2.10 Installing gas bottle 21
2.11 Installing gas bottle on cart 22
2.12 Moving equipment by lifting 23
3. Operation 25
3.1 Operating power source 26
3.2 Operating control panels MTP23X and MTP33X 27
3.2.1 Home 29
3.2.2 Start & stop sequence 29
3.2.3 Settings 32
3.3 Operating control panel MTP35X 35
3.3.1 Home view 36
3.3.2 Weld Assist view 37
3.3.3 Memory channels view 40
3.3.4 Start & stop sequence view 41
3.3.5 Pulse view 44
3.3.6 Current mode view 45
3.3.7 Settings view 46
3.3.8 Info view 49
3.3.9 Screen saver 50
3.4 Operating cooling unit 52
3.5 Remote control 53
4. Maintenance 54
4.1 Disposal 56
5. Troubleshooting 57
5.1 Error codes 59
© Kemppi
2
1920900 / 2052
To Next Page
Loading...
Need help?
General
