MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
1.1 Equipment description
Kemppi MasterTig 235 AC/DC, 325 DC, 335 AC/DC and 425 DC welding equipment is designed for professional industrial
use, with characteristics especially suitable for welding materials like aluminum and stainless steel. The equipment con-
sists of power source, control panel and cooling unit (optional). The MasterTig Cooler M cooling unit is used in liquid-
cooled TIG welding with MasterTig power source. The multipurpose MasterTig power sources are suitable for MMA weld-
ing, TIG welding and pulsed TIG welding with both direct current (DC) and, depending on the model selected, altern-
ating current (AC).
Available power source models:
• MasterTig 235ACDC GM, multi-voltage and generator compatible (230 A AC/DC) *
• MasterTig 325DC (300 A DC)
• MasterTig 325DC G, generator compatible (300 A DC) *
• MasterTig 325DC GM, multi-voltage and generator compatible (300 A DC)
• MasterTig 335ACDC (300 A AC/DC)
• MasterTig 335ACDC G, generator compatible (300 A AC/DC) *
• MasterTig 335ACDC GM, multi-voltage and generator compatible (300 A AC/DC)
• MasterTig 425DC G, generator compatible (400 A DC) *
* A dedicated VRD(Voltage Reduction Device)model version, where the VRD function is locked on, is also available.
Control panels:
• MTP23X control panel (DC, membrane panel)
• MTP33X control panel (AC/DC, membrane panel)
• MTP35X control panel (AC/DC, 7" TFT LCD display panel).
Equipment:
1. MasterTig 235/325/335/425 power source
© Kemppi
5
1920900 / 2052
To Next Page
Loading...
Need help?
General
