Kemppi MasterTig 235ACDC User Manual

MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
To browse through channels and select channels:
1. Go to the Channels view.
2. Turn the control knob (1) to switch between channels. The highlighted channel is automatically selected.
To save or delete channels:
1. Turn the control knob (1) to highlight a channel.
2. Open the channel actions menu by pressing the control knob button (1). The available actions are shown:Cancel,
Save changes, Save to and Delete.
3. Select an action with the control knob (1).
3.3.4 Start & stop sequence view
The parameters diagram view makes base parameter identification and setting easy. From pre-gas time to post-gas time
and everything in between, you can quickly select and adjust the needed parameter value.
© Kemppi
41
1920900 / 2052

Kemppi MasterTig 235ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 235ACDC
Category	Welding System
Language	English