Kemppi MasterTig 235ACDC User Manual

MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
3.1 Operating power source
1. Turn the power source ON. The power switch is located in the rear.
2. Depending on your control panel type, wait approximately 15 seconds for the system to start up.
For control panel operation, refer to:
• "Operating control panels MTP23X and MTP33X" on the next page
• "Operating control panel MTP35X" on page35
© Kemppi
26
1920900 / 2052

Kemppi MasterTig 235ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 235ACDC
Category	Welding System
Language	English