MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
MASTERTIG 425DC G
Feature Description Value
Wired communication type Remote
Analog
CAN BUS
Kemppi Remote-Bus
Arc striking voltage
5...11 kV
Stick electrode diameters ø mm
1.6...7.0 mm
TIG welding cable connection type
R1/4
Standards
IEC60974-1,-3,-10
IEC 61000-3-12
AS 60974.1-2006
(3
GB 15579.1
1)
In AU power source models with the Voltage Reduction Device (VRD) function locked on, only this value is applicable.
2)
NO: These devices are not allowed to be used within a 20 km radius of the centre of Ny-Ålesund at Svalbard,
Norway. This restriction applies to any 2-32 GHz transmitter operation.
3)
Applies only to the power source model versions where the VRD function is locked on.
© Kemppi
69
1920900 / 2052
To Next Page
Loading...
