Kemppi MinarcTig Evo 200 Service Manual

Service manual MinarcTig Evo 200
Version 1.1.5.
29.9.2015
2
Kemppi Oy
2. GENERAL
MinarcTig Evo is a new generation small TIG and MMA machine. It is based on MinarcTig 180, but the
power section and design are totally new. Machine has power factor correction in the primary side to
meet the latest European regulations.
The MinarcTig Evo machines are for DC TIG and MMA-welding.
MinarcTig Evo 200 can be connected to the mains supply of 230VAC 1~. PFC makes possible to weld
with the full power (TIG 200A) even when modern circuit breakers are used.
MinarcTig Evo panel card software can be reprogrammed in the field with Datamaster 2.
Overvoltage watch is 290VAC and under voltage watch is 150VAC.
Current range is 5-200A in TIG and 10-170A in MMA mode.

Kemppi MinarcTig Evo 200 Specifications

General

Input Voltage	230 V
Protection Class	IP23
Power Factor	0.99
Welding Process	TIG, MMA
Duty Cycle TIG	35% at 200 A
Standards	IEC 60974-1, IEC 60974-10