Need help?Do you have a question about the Kemppi Promig 530 and is the answer not in the manual?
General| Brand | Kemppi |
|---|---|
| Model | Promig 530 |
| Category | Welding System |
| Language | English |
Identifies and explains the controls and connectors on the machine.
Safety precautions regarding welding arc and spatters.
Safety precautions related to fire and explosion hazards.
Safety precautions concerning mains voltage and cables.
Safety guidelines for the welding power circuit and protective clothing.
Safety advice on ventilation and handling welding fumes.
Steps for assembling the MIG system, including power source and control panel.
Details how to adjust the maximum wire feed speed from 18 m/min to 25 m/min.
Important safety and handling information for shield gas bottles.
Step-by-step guide for installing a gas bottle and regulator.
Detailed description of the MC control panel and its functions.
Explanation of SELECTO mode for storing and recalling welding parameters.
How to adjust welding dynamics for arc stability and spatter control.
Detailed explanation of SELECTO modes (OFF, ON, SET) for the MC panel.
Detailed description of the ML control panel and its functions.
Explanation of SYNERGIC mode operations for the ML panel.
How to adjust welding dynamics on the ML panel for different welding types.
How to adjust MMA welding dynamics for arc control.
Detailed explanation of SYNERGIC MIG and PULSMIG operations on the ML panel.
How to select the wire feeder address using jumper blocks.
Error code Err 1 related to MMA welding selection.
Error code Err 2 related to gun switch and data transmission.
Error code Err 4 related to cooling mode and PROCOOL unit.
To Next Page