Kemppi X3 User Manual

8
X3 MIG Welder© Kemppi Oy 2018 1814
OPERATING MANUAL
3.5 Optional accessories
3.5.1 Wheel sets
The X3 Power Source can be tted with wheels for easy
movement of the unit.
There are two dierent wheel sets available, one with
big rear wheels only and another with big rear wheels
and turning front wheels. Installation instructions are
delivered with the wheel set package.
x 4
x 4
3.5.2 Undercarriage
To enable easy movement of the unit, the power source
can be mounted on the P20 undercarriage. Installation
instructions are delivered with the undercarriage
package.
3.5.3 Wire feeder mounting plate
If you are using wheels or undercarriage, you can attach
the wire feeder on top of the power source using the X3
Wire Feeder Mounting Plate to create a compact welding
unit that is easy to move around.
To mount the wire feeder on top of the power source,
follow the instructions delivered with the mounting plate.
1 2
x 5
x 4
3.5.4 Gas heater
When using CO₂ shielding gas, a 110 V gas heater can be
connected to the power supply located at the back of the
X3 MIG Welder power source.

Kemppi X3 Specifications

General

Brand	Kemppi
Model	X3
Category	Welding System
Language	English