Kenwood MDX-F1 User Manual

MDX-F1 (EN)
12
Operation
Let's put out some sound
Contents
AUTO POWER SAVE function
When the unit is ON and the unit is left for 30 minutes with CD, MD and TAPE not operating, the unit is switched
off automatically by this function. This is convenient when you forget to turn power off after listening. This
function can be activated or deactivated by the following operation.
1 Select “A.P.S. SET?” from the
menu.
To switch
APS off
To switch
APS on
LightsGoes off
÷ If the current input is TUNER, the auto power save function is activated only when the volume is set to 0.
(Press the “SET/Demo” key
while the “?” mark is blinking)
D
e
m
o
MENU
SET
V
O
L
U
M
E
/
M
U
L
T
I
C
O
N
T
R
O
L
V
O
L
U
M
E
/
M
U
L
T
I
C
O
N
T
R
O
L
A.P.S.
A.P.S.
D
e
m
o
SET
2 Select.
3 Press the SET/
Demo key.

Kenwood MDX-F1 Specifications

Amplifier Section

rated output power during STEREO operation	4 W + 4 W
speaker unit	80 mm, cone type

Tuner Section

FM tuning frequency range	87.5 MHz ~ 108 MHz
MW (AM) tuning frequency range	531 kHz ~ 1, 602 kHz

General Specifications

power consumption	38 W
standby power consumption	0.3 W
dimensions (W x H x D)	464 mm x 182 mm x 243 mm
weight (net)	5.4 kg