Kenwood MDX-F1 User Manual

13
Operation
MDX-F1 (EN)
Playback of CD
Contents
1 Open the CD cover.
(by pressing the PUSH OPEN button)
2 Place a disc.
3 Close the CD cover.
The label side must be on top.
CD
TRACK NO.
01 012
0
2
2
1
Load a disc.
1
13
÷ Do not touch the played side of disc.
÷ Be sure to place a disc horizontally. Placing it with an
inclination will result in malfunction.
Start playback.
2
÷ After a few seconds, play starts from track No.1.
Playback of CD
CD
6
If you load a disc in the CD player in advance while the
power is off. pressing the CD 6 key turns power on
automatically and starts the disc playback.

Kenwood MDX-F1 Specifications

Amplifier Section

rated output power during STEREO operation	4 W + 4 W
speaker unit	80 mm, cone type

Tuner Section

FM tuning frequency range	87.5 MHz ~ 108 MHz
MW (AM) tuning frequency range	531 kHz ~ 1, 602 kHz

General Specifications

power consumption	38 W
standby power consumption	0.3 W
dimensions (W x H x D)	464 mm x 182 mm x 243 mm
weight (net)	5.4 kg