35
Operation
MDX-F1 (EN)
MD Edit Functions
Contents
MD Edit Functions
Assigning a title to a disc or track
When titles are assigned to a disc and its tracks,
the titles can not only be displayed during play-
back but title search (searching a track by the
title) is also made possible. The assigned titles
can be changed or deleted with the same proce-
dure.
The MD operates on the basis of the information
read from the disk into memory. After title input or
editing, be sure to eject the minidisc so that the data
is written in it by “WRITING”.
Select the “MD” input. (Execute operation in stopped condition or during playback.)
*
Activate the title input mode.
1
Disc titles can be assigned in stop mode.
When the MD 6 key pressed before
step 1-3 while assigning a title to a
track, the title can be entered while lis-
tening to that track.
÷ It takes a while because data should be read out of the
disc.
1 Press the TITLE INPUT key.
Total number of title characters
Up to 1792 characters can be input per disc and up
to 80 characters can be input per track.
A space (blank character) also require the same
amount of data as alphanumeric characters. When
deleting a title, it is not recommended to overwrite
spaces on previous characters but use the CLEAR/
DELETE function. ‡
In case of disc title
In case of track title
Select the desired track No.
Select “dISC”.
To advanceTo return
2 Select whether the disc title
or track title input.
(when it is required to title a
track).
3 Press the SET key.
TITLE
001
MD EDIT
US
TOCACCES
TITLE
dISC
MD EDIT
..
NO TITLE
TITLE INPUT
¢4
P.CALL
SET
Continued on next page
TITLE
dISC
MD EDIT
US
TOCACCES
To abort operation, press the TITLE INPUT key again.
To Next Page
Loading...
Need help?
Amplifier Section
